Avigilon H4 - User Manual

Installation Guide
Avigilon™ H4 Fisheye Dome Camera Models:
6.0L-H4F-DO1-IR and 12.0-H4F-DO1-IR

Summary

Important Safety Information

WARNING

Instructions that if not followed, can lead to severe injury or death.

CAUTION

Instructions that if not followed, can lead to minor injury or device damage.

Installation

Removing the Dome Cover

Step-by-step guide to safely detach the camera's protective dome cover.

Preparing the Cables

Instructions on how to prepare Ethernet and auxiliary cables for installation.

(Optional) Configuring microSD Card Storage

Steps to insert and enable onboard storage using a microSD card.

(Optional) Enabling the Microphone

Instructions on how to enable the camera's built-in microphone via a switch.

Mounting the Dome Camera

Mounting the Dome Camera to a Ceiling or Wall

Mounting the Dome Camera Using the Side Cable Entry Hole

Mounting the Dome Camera to an Electrical Box

(Optional) Mounting the Dome Camera to an NPT Pipe

Connecting Cables

Initializing a Camera Username and Password

Assigning an IP Address

Accessing the Live Video Stream

Installing the Dome Cover

Configuring the Camera

Auxiliary Cable Connections

Configuring the Microphone

Connection Status LED Indicator

Troubleshooting Network Connections and LED Behavior

Resetting to Factory Default Settings

Setting the IP Address Using the ARP;Ping Method

Cleaning

Avigilon H4 Specifications

General

Sensor Type	CMOS
Impact Protection	IK10
Camera Type	Dome
Day/Night	Yes
Video Compression	H.264
Wide Dynamic Range (WDR)	120dB
Power	PoE (IEEE 802.3af)
Operating Temperature	-40 °C to +50 °C (-40 °F to +122 °F) depending on the model
Ingress Protection	IP66
Onvif Compliance	Yes
IP Rating	IP66
Power Supply	12VDC or PoE