(Optional) Configuring microSD Card Storage
To use the camera's SD card storage feature, you must insert a microSD card into the card slot.
It is recommended that the microSD card have a write speed of class 10 or better. If the microSD card does
not meet the recommended write speed, the recording performance may suffer and result in the loss of
frames or footage.
1. Insert a microSD card into the camera.
CAUTION — Do not force the microSD card into the camera or you may damage the card and
the camera.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
(Optional) Enabling the Microphone
This dome camera features an internal microphone, and newer models include a switch to physically enable
or disable the microphone. The microphone switch is set to OFF by default.
It is recommended that you enable the microphone before installing the camera in its final location.
1. Locate the microphone controller on the dome cover assembly.
2. Slide the switch from the default OFFposition to ON to enable the microphone.
(Optional) Configuring microSD Card Storage 10
To Next Page
Loading...
Need help?
General
