System
On the System page, you can manually upgrade the camera firmware, reboot the camera, and restore all of the
camera’s factory default settings.
l Click Reboot to restart the camera or encoder.
l Click Restore to revert the camera or encoder firmware back to the factory default settings.
Tip: If you've enabled the feature that maintains your username and password after a firmware revert,
make sure you have a written copy of your current usernames and passwords. For more information, see
Keeping Usernames and Passwords AfterFirmware Revert on the previous page.
l To upgrade the camera or encoder firmware, see Upgrading the Camera Firmware below.
Upgrading the Camera Firmware
To manually upgrade the camera’s firmware, download the latest version of the firmware .bin file from the
Avigilon website (http://avigilon.com/support-and-downloads/for-cameras-and-hardware/firmware-updates-
and-downloads/) and complete the following procedure:
24 System
To Next Page
Loading...
