User’s Manual
2. Load the Carrier Sheet with the gray section (printed
section) facing downwards.
3. Adjust the paper guides to the width of the Carrier Sheet.
Adjust the paper guides so that there is no space between
the guides and the Carrier sheet. Space between the
guides and Carrier Sheet may cause the Carrier Sheet to
become unaligned during scanning, and skew the scanned
image.
4. Start the scan.
Notice:
[Carrier Sheet] is available for the models that support the
Carrier Sheet.
Some functions are disabled when [Carrier Sheet] is
checked.
This option may not work properly on some applications.
To Next Page
Loading...
