Need help?Do you have a question about the Avital 3100LX and is the answer not in the manual?
Details on the maintenance requirements for the vehicle security system and transmitter battery.
Explains the requirements for validating the warranty, including the warranty card and proof of purchase.
Information regarding FCC compliance and operational conditions for the device.
Details the default button functions for the remote transmitter.
Instructions on how to arm the security system, including passive arming features.
Instructions on how to disarm the security system and confirmation indicators.
Procedure to disarm the system manually using the Valet switch and ignition key.
How to activate Panic Mode for immediate attention and how to stop it.
How to temporarily disable arm/disarm chirps using the remote.
Instructions on entering and exiting Valet Mode using the Valet switch.
Details on chirp indicators and Bypass Notification during system arming.
Information on Tamper Alert and NPC engagement indicated by disarming chirps.
Lists standard input assignments and LED flash codes for system zones.
Details the 506T audio sensor for detecting glass tampering or breakage.
Explains the 520T Backup Battery's function during power loss.
Describes the 508D 'radar' sensor for intrusion detection.
Information on controlling vehicle power door locks as an expansion option.
Configuration for interior dome light illumination after disarming the alarm.
Definition of the system's central 'brain' controlling all functions.
Automatic switch preventing starter cranking when the system is armed.
Dual-stage shock sensor detecting impacts on the vehicle.
Any physical connection to the system, like sensors or switches.
Red indicator light showing system status and reporting triggers/faults.
Noise-generating device producing chirps and tones when triggered.
Hand-held device for operating system functions.
Instructions for arming the system with the remote control.
How to disarm the security system using the remote.
Procedure for disarming the system without a remote using the Valet switch.
Method to temporarily disable arm/disarm chirps.
How to activate and stop Panic Mode.
Steps to enter or exit Valet Mode using the Valet switch.
How to enter or exit Valet Mode using the remote.
General| Model | 3100LX |
|---|---|
| Brand | Avital |
| Channels | 4 |
| Remote Range | Up to 1, 500 feet |
| Panic Mode | Yes |
| Starter Kill | Yes |
| Keyless Entry | Yes |
| Remote Control | Yes |
| Number of Buttons on Remotes | 4 |
| Number of Remotes Included | 2 |
| Dome Light Supervision | Yes |
| Valet Mode | Yes |
| Shock Sensor | Yes |
| Type | Car Alarm System |
To Next Page
