Need help?Do you have a question about the Avital Diablo 2 and is the answer not in the manual?
General| Number of Remotes Included | 2 |
|---|---|
| Engine Immobilizer | Yes |
| Starter Kill | Yes |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Shock Sensor | Yes |
Guarantees control unit and remote operation for the car's lifetime.
Two 3-button/6-channel remotes with illuminated buttons for up to 100 ft range.
All features programmed via valet switch for ease of use.
System automatically disables vehicle starter when armed for enhanced security.
Precision sensor detects intrusion-related vibrations and impacts.
Highly luminescent LED indicates alarm status and entry point violations.
Loud siren alerts occupants and passersby of intrusion attempts.
One remote controls up to six vehicles equipped with Avital security systems.
Allows adding up to four Avital remote controls to the system.
Removes lost/stolen remote codes to prevent unauthorized system access.
Blocks electronic scanner codes to prevent unauthorized disarming.
Activates siren, lights, and unlocks doors for immediate entry in emergencies.
Turns on interior lights for 30s upon remote disarm or until ignition is on.
Offers perimeter security with separate trigger connections for doors, hood, and trunk.
Audibly warns if the alarm was triggered while the vehicle was unattended.
Flashing LED identifies which zone was triggered in the vehicle's absence.
Bypasses faulty triggers/sensors while continuing to protect vehicle.
System can be programmed to arm via remote or automatically.
LED flashes rapidly during 30-second passive arming mode.
Allows silent arming or disarming of the system using a specific remote button.
Prevents passive arming when vehicle is serviced or parked by others.
Allows disabling siren chirps until user decides to restore them.
Tests all triggers and sensors every time the system is remotely armed.
Parking lights flash to confirm remote arming, disarming, and alarm activation.
Allows locking and unlocking doors remotely without using the vehicle key.
Automatically locks doors when the alarm passively arms.
Enables control of door locks or accessories while in valet mode.
Provides output for remote-controlled accessories like starter or window roll-up.
System returns to last state after battery disconnection and reconnection.
Reimburses up to $1,500 of insurance deductible if vehicle is stolen and unrecovered.
Details transmitter range and basic response to button presses.
Explains active arming via remote and passive arming automatically.
Procedure for disarming the alarm using the remote control.
Instructions for silently arming or disarming the system with button #3.
Using remote button #2 to activate optional accessories like trunk release.
Describes the valet switch for programming and bypassing alarm functions.
Steps to activate Valet Mode using ignition key and valet switch.
Steps to deactivate Valet Mode using ignition key and valet switch.
Option to automatically lock doors upon passive arming.
Procedure to trigger panic mode using remote button #1.
Using remote control for locks and accessories while in Valet Mode.
Table explaining LED status codes for system feedback.
Siren chirps 3 times on disarm if alarm was previously triggered.
LED flashes indicate specific zones triggered after an intrusion.
System alerts for faulty sensors or triggers when armed.
Erasing lost remotes and learning new ones.
System retains last state after battery disconnect/reconnect.
Table explaining meanings of siren chirps and parking light flashes.
Details features, required chirps, and secondary actions for programming.
Details features, chirps, and actions for programming remote controls.
Procedure to learn all channels and restore factory preset order.
Steps to erase all remote controls from the system's memory.
To Next Page
