EasyManua.ls Logo

Avital 4003 User Manual

Avital 4003
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Model 4003
Installation Guide
NOTE:
This product is intended for installation by a profes-
sional installer only! Any attempt to install this product by any
person other than a trained professional may result in severe
damage to a vehicle’s electrical system and components.
© 2009 Directed Electronics, Vista, CA
N4003L 2009-04
Avital
Question and Answer IconNeed help?

Do you have a question about the Avital 4003 and is the answer not in the manual?

Avital 4003 Specifications

General IconGeneral
Number of Buttons4
Number of Channels4
RangeUp to 1, 500 feet
Remote StartYes
Keyless EntryYes
Starter KillYes
Ignition-Controlled Door LocksYes
Trunk ReleaseYes
Panic ModeYes
CompatibilityMost vehicles

Summary

Avital Model 4003 Installation Guide

Important Safety Notice

Critical safety warning regarding professional installation and potential vehicle damage.

Safety First

General Safety Warnings

Mandatory safety precautions for system installation and operation.

User Precautions and Responsibilities

User's sole responsibility for safe operation, including carbon monoxide detection.

Installation Preparation

Important Installation Notes

Key considerations for vehicle compatibility and pre-installation checks.

Wiring and Connections

Making Reliable Wiring Connections

Best practices for soldering and using connectors for secure wiring.

Wiring Diagrams

Primary Harness (H1) Wiring

Detailed pinout for the main 9-pin and 3-wire harnesses.

Heavy Gauge Relay Wiring Diagram

Connections for high-current circuits using heavy gauge wires.

Heavy Gauge Relay Interface

Connecting High Current Circuits

Instructions for connecting heavy gauge wires to vehicle circuits.

Remote Start Harness (H2) Interface

5-Pin Connector Wiring

Detailed wiring for the H2 5-pin connector, including neutral safety input.

Neutral Safety Switch Operation and Testing

Neutral Safety Switch Testing Procedure

Step-by-step guide to test the neutral safety shutdown circuit.

Bitwriter Configuration Tool

Bitwriter Features and Settings Guide

Adjustable features and settings using the Bitwriter tool.

System Safety Checks

Brake Shutdown Circuit Test

Verifying the brake pedal correctly shuts down the remote start.

Hood Pin Shutdown Circuit Test

Verifying the hood pin correctly prevents remote start.

Neutral Safety Shutdown Circuit Test

Verifying the neutral safety feature prevents starting in gear.

Related product manuals