Need help?Do you have a question about the AVM EVOLUTION A2 and is the answer not in the manual?
Details shielding, toroidal transformers, plated sockets, and epoxy resin circuit boards for durability and signal integrity.
Explains dual-mono power supplies, filter capacitance, transformer power, and stable output stages for optimal performance.
Describes differential stages, FET transistors, ground plane, and damping factor for precise audio reproduction.
Identifies key controls like On/Off, selector, display, level, balance, and headphone jack.
Details the functions and usage of the optional system remote control transmitter.
Provides essential advice on airflow, location, and avoiding heat damage to surrounding items.
Highlights risks related to heat-sensitive objects and children contacting the unit.
Guides on connecting power, audio sources, tape recorders, processors, and amplifiers.
Explains switching, program source selection, volume, balance, and input sensitivity adjustments.
Details how to adjust input sensitivity for consistent loudness across different sources.
Covers headphone use, tape recording, monitoring, and playback functions.
Explains how to activate and use external processors or equalizers with the unit.
Provides instructions for cleaning the casing and safety precautions during cleaning.
Lists checks for no sound, including headphone connection, monitor/processor settings, and power issues.
Addresses amplifier switching off due to overheating, short circuits, or DC voltage faults.
Solves humming issues via ground loops and remote control malfunctions due to battery or line-of-sight.
Lists input sensitivity, impedance, signal-to-noise ratio, and output power at different impedances.
Details frequency response, rise time, slew rate, damping factor, and power intake.
To Next Page
General
