AVM EVOLUTION A2 - Technical Specifications; Input and Output Specifications; Frequency Response and Power

INPUT SENSITIVITY
CD
AUXI
INPUT IMPEDANCE
CD
AUXI
TECHNICAL INFORMATION TO THE EVOLUTION A2
0,45 - I,av
0,9 - 3,6V
10 kOhm
I kOhm
SIGNAL TO NOISE RATIO (SNR)
CD
FREQUENCY RESPONSE
Frequency response
Load band width 25 W 14 Ohm:
Rise time at 4 Ohm:
Slewrate
Damping factor
OUTPUT
Performance at a Ohm:
Performance at 4 Ohm:
Performance at 2 Ohm:
Intermodulation 25 W 14 Ohm:
Distortion factor 25 W 14 Ohm:
Transient intermodulation (TIM);
POWER INTAKE
Power supply
Dimensions (LBH)
Weight
104 dB (A)
< 0.3 Hz - > 500 kHz
< 0.3 Hz - > 500 kHz
< I ~s
> 100V/~s
> 500 (DC - 10 kHz)
7S Watt
125 Watt
laOWatt
< 0.0 I % (below measuring range)
< 0.005 %
not measurable
230 Volt 1 50 Hz 1 350 VA (standby 3 VA)
430 mm x 330 mm x I 10 mm
12 - 14 kg (depending on fittings)
We reserve the right to amend technical details and fittings.
Valid: 07/99
30