Step 3
Plug the other end of the DSL cable into the
port labelled “F” on the telephone socket.
There will be no DSL connection until
your DSL connection date.
The connection will be available by
6pm at the latest on this day.
1&1 will inform you of your connec-
tion date by letter, email and SMS.
Step 4
The “Power / DSL” light will stop flashing
and will be permanently illuminated once
the connection to the DSL network has been
established. This may take a few minutes.
– Phone socket –
Note:
Only connect the 1&1
DSL-Modem to the master
telephone socket! Ask a
technician to remove all
other telephone sockets
where possible, as these
may interfere with the
signal and affect your
connection.
10
To Next Page
Loading...
