112 DSR Switch Installer/User Guide
Heat Dissipation
DSR1030: 39.9 BTU/hr
DSR2030: 44.7 BTU/hr
DSR4030: 52.9 BTU/hr
DSR8030: 74.7 BTU/hr
AC-input Range 100 - 240 VAC
AC Frequency 50 - 60 Hz autosensing
AC-input Current Rating 0.5 A
AC-input Power (maximum) 40 W maximum
AC-input Cable
18 AWG three-wire cable, with a three-lead IEC-320; receptacle on the power
supply end and a country-dependent plug on the power resource end
Ambient Atmospheric Condition Ratings
Temperature
32 to 104 degrees Fahrenheit (0 to 40 degrees Celsius) operating;
-4 to 158 degrees Fahrenheit (-20 to 70 degrees Celsius) nonoperating
Humidity 10 - 95% noncondensing
Safety and EMC Approvals
and Markings
UL, FCC, cUL, ICES-003, CE, GS, VCCI, MIC, C-Tick, GOST
Safety certifications and EMC certifications for this product are obtained under
one or more of the following designations: CMN (Certification Model Number),
MPN (Manufacturer’s Part Number) or Sales Level Model designation. The
designation that is referenced in the EMC and/or safety reports and certificates
are printed on the label applied to this product.
Table F.5: DSR1031 Switch Product Specifications
Server Ports
Number 8
Type PS/2, Sun, USB and Serial
Connectors 8-pin modular
Sync Types Separate horizontal and vertical
Plug and Play DDC2B
Video Resolution
640 x 480 @ 60 Hz
800 x 600 @ 75 Hz
960 x 700 @ 75 Hz
1024 x 768 @ 75 Hz
1280 x 1024 @ 75 Hz
Table F.4: DSR1030/2030/4030/8030 Switch Product Specifications (Continued)
To Next Page
Loading...
