AVE-Series User Manual | 9
Cleaning
•
When the surface of the display becomes dirty, please wipe the surface lightly with
a microfibre cloth.
•
If the surface requires additional cleaning, lightly moisten the cloth.
•
Do not to let any kind of liquid enter the display as it may cause electrical shock or
damage.
•
Do not clean the display with alcohol, solvents or ammonia, as this could damage
the display.
•
Never spray a cleanser directly onto the screen.
•
If liquid gets on the display’s screen, please clean it with a dry and soft cloth
immediately.
Power Considerations
•
If the power cord or plug is damaged or becomes hot, turn off the main
power switch of the display, make sure the power plug has cooled down and
remove the plug from the power outlet. If the display is still used in this
condition, it may cause fire or electrical shock. Please contact your dealer.
Protect and correctly use the power cord/plug.
Don't pinch the power cord/plug between hard surfaces.
Don't step on the power cord/plug.
Before inserting the power plug into the wall outlet, connect the power
cord to the display.
Don't operate the display with a damaged power cord or it may damage
the display.
If an extension cord must be used, ensure the voltage rating exceeds the max
power consumption of the display. If the voltage rating is less than the display,
it will cause the extension cord to overheat.
During a lightning storm, always remove the plug from the power outlet.
Only connect the screen to an earthed electrical socket – UK only
Don’t install or remove the power plug with wet hands.
If the display will not be used for a long period of time, unplug the display from the
power outlet.
To Next Page
Loading...
Need help?
General
