Avonic CM73-IP - Page 84

Camera Settings
B&W
Mode
http://192.168.5.126/ajaxcom?szCmd={"SetEnv":
{"VideoParam":[{"stImg":{"nBWMode":0},"nChannel":0}]}}
nBWMode 0:
4:
Color
B & W
Flip-H http://192.168.5.126/ajaxcom?szCmd={"SetEnv":
{"VideoParam":[{"stImg":{"nFlipH":3},"nChannel":0}]}}
nFlipH 2:
3:
ON
OFF
Camera Settings
Image
Function Code Command Setting
Flip-V http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoParam":[{"stImg":
{"nFlipV":2},"nChannel":0}]}}
nFlipV 2:
3:
ON
OFF
AutoFlip http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoParam":[{"stImg":
{"nAutoFlipV":2},"nChannel":0}]}}
nAutoFlipV ON
OFF
DZoom http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoParam": [{"stImg":
{"nEZoom":3},"nChannel":0}]}}
nEZoom 2:
3:
ON
OFF
Noise Reduction
Camera Settings
Function Code Command Setting
NR-2D http://192.168.5.126/ajaxcom?szCmd={"SetEnv":
{"VideoParam":[{"stNR":{"noise2D":0},"nChannel":0}]}}
noise2D [0, 8]
NR-3D http://192.168.5.126/ajaxcom?szCmd={"SetEnv":
{"VideoParam":[{"stNR":{"noise3D":0},"nChannel":0}]}}
noise3D [0, 8]
0: OFF
8: Auto
Dynamic
Hot Pixel
http://192.168.5.126/ajaxcom?szCmd={"SetEnv":
{"VideoParam":[{"stNR":{"dhotpixel":3},"nChannel":0}]}}
dhotpixel [0, 5] 0: OFF
Style http://192.168.5.126/ajaxcom?szCmd={"SetEnv":
{"VideoParam":[{"stColor":{"nStyleInx":0},"nChannel":0}]}}
nStyleInx [0, 4] 0: Default
1: Normal
2: Clarity
3: Bright
4: Soft
Video OSD
Video OSD
Get video parameters
Code http://192.168.5.126/ajaxcom?szCmd={"GetEnv":{"VideoOsd":{"nChannel":-1}}}
Set set video parameters
Code http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoOsd":[{"stTime":
{"bEnable":1,"nIndex":0,"nXPos":0,"szText":"","nYPos":10000, "stFtColor":
{"byAlpha":128,"byRed":255,"byGreen":255,"byBlue":255},"stBkColor":
{"byAlpha":0,"byRed":0,"byGreen":0,"byBlue":0}},"stTitle":{"bEnable":0,"nIndex":0,"nXPos":0,"szText":"","nYPos":0,"stFtColor":
{"byAlpha":128,"byRed":255,"byGreen":255,"byBlue":255},"stBkColor":
{"byAlpha":0,"byRed":0,"byGreen":0,"byBlue":0}},"nChannel":0}]}}
NOTE: All params can be saved by this command and also you can set one param alone.
Function Code Command Setting
Show Time http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoOsd":[{"stTime":
{"bEnable":1},"nChannel":0}]}}
bEnable 0: Not show
1: Show
Show Title http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoOsd":[{"stTitle":
{"bEnable":1},"nChannel":0}]}}
bEnable 0: Not Show
1: Show
Video OSD
Set video parameters
Function Code Command Setting
84