EasyManua.ls Logo

AVS Electronics CAPTURE 16 - General Information; Safety and Installation Precautions

Default Icon
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
ARTICLES DESCRIPTION
CAPTURE 32 Microprocessor central control unit
P
Grado 3
CAPTURE 16 Microprocessor central control unit
P
Grado 2
CAPTURE 8 Microprocessor central control unit
A500 Operating keyboard
P
Grado 3
A500 Plus Operating keyboard
P
Grado 3
TOY L, TOY T Proximity key with “NFC” technology
TOY C Proximity badge with “NFC” technology
XGSM GSM telephone communicator
P
Grado 3
XGSM485 - XGS485PRO GSM telephone communicator
DIGIVOC Voice synthesis boards
P
Grado 2
XEXP8 Zone expansion module
P
Grado 3
XSATWS Zone expansion module via radio
C8 Zone and output expansion module
XSAT36 Zone and output expansion module
P
Grado 3
XSATHP Expansion module for digital sensors
XSATPW 3 Power feeder in boards with zone and output expansion
P
Grado 2
XSATPW 3 Q Power feeder in metallic box with zone and output expansion
P
Grado 2
XSATPW 5 Power feeder in boards with zone and output expansion
XSATPW 5 Q Power feeder in metallic box with zone and output expansion
POWER 3 Extra power feeder in board
P
Grado 2
POWER 3 Q Extra power feeder in metallic box
P
Grado 2
POWER 5 Extra power feeder in board
POWER 5 Q Extra power feeder in metallic box
XMR2 2-relay board
P
Grado 3
MR4 4-relay board
P
Grado 3
MR8 8-relay board
P
Grado 3
EWEB LAN - WEB SERVER interface
EWEB WIFI LAN - WEB SERVER WIFI interface
GENERAL INFORMATION
The control panels Capture are compatible with the following devices
La conformità alla normativa EN50131 decade se:
• i dispositivi non vengono installati nei contenitori CONT-CAPTURE, CONT SX e CONT SAT W o facendo riferimento a quanto
espressamente indicato nella tabella.
The products must be used according to the intended use and in compliance with the rules applicable to the various plant engineering
types.
However, before commissioning the installed products, the system must be tested in order to verify its functioning and compliance
with the safety rules according to that indicated by Law n. 46 dated 05/03/90 and by Standard CEI 79-3.
The equipment must not be exposed to dripping or water sprays and no object full of liquid must be placed on it.
AVS ELECTRONICS S.p.a. reserves the right to make amendments at any moment and without notice.
INSTALLATION AND MAINTENANCE MUST BE EXECUTED BY QUALIFIED PERSONNEL

Related product manuals