Why can’t I play recorded data on my Avtech AVC796 DVR?
If you can't play recorded data on your Avtech DVR, ensure there are at least 8192 images of recorded data for playback to work properly. If not, your DVR will stop the playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds (8192 images / 30 IPS) for the playback to work properly.
How to fix failed backup of recorded files from remote PC side of Avtech AVC796 DVR?
If you're failing to backup recorded files from the remote PC side of your Avtech DVR, ensure you have supervisor privileges to perform this function. Also, verify that the network connection information is correct (IP Address / Port / User Name / Password). Finally, specify the hard disk (HDD Number) and channel number (Channel) within which have the recorded data you need.
Why can’t I backup video with audio from my Avtech DVR?
If you can't backup video with audio from your Avtech DVR, make sure the audio cameras are connected to the DVR channels which support the audio function.
What to do if the IR remote control doesn't work with my Avtech AVC796?
If the IR remote control isn't working with your Avtech DVR, first check whether the batteries are installed. Then, aim the remote at the IR receiving zone to control the DVR operation.
General| Mobile Surveillance | Yes |
|---|---|
| PTZ Control | Yes |
| Backup Method | USB, Network |
| Compression | H.264 |
| Power Supply | DC 12V |
| Video Output | HDMI, VGA |
| Recording Frame Rate | 30 IPS @ 960H / D1 / CIF |
| Audio Input/Output | 1 channel |
| Hard Drive Support | SATA |
| Network Interface | RJ45 10/100Mbps |
| Channels | 16 |
| USB | 2.0 |
| Video Input | 4/8/16 channels |
To Next Page
