Safety Warnings
Read all the instructions carefully before using the unit and keep them for future
reference.
Retain the manual. If you pass the unit onto a third party make sure to include this
manual. Check that the voltage marked on the rating label matches your mains voltage.
Damage
Please inspect the unit for damage after unpacking.
Do not continue to operate the unit if you are in any doubt about it working normally, or if
it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.
Location of Unit
The unit must be placed on a flat stable surface and should not be subjected to vibrations.
Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.
The mains socket must be located near the unit and should be easily accessible.
Temperature
Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from
heat sources
such as radiators or gas/electric fires.
Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
Never place any type of candle or naked flame on the top of or near the unit.
Moisture
To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain,
moisture, dripping or splashing. No objects filled with liquids, such as vases, should be
placed on the unit.
If you spill any liquid into the unit, it can cause serious damages. Switch it off at the mains
immediately. Withdraw the mains plug and consult your dealer.
Ventilation
To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains
and other materials do not obstruct the ventilation vents.
Do not install or place this unit in a bookcase, built-in cabinet or in another confined
space. Ensure the unit is well ventilated.
Safety
Always disconnect the unit from the mains supply before connecting/disconnecting
other devices or moving the unit.
Unplug the unit from the mains socket before a lightning storm.
3
To Next Page
Loading...