DVD FUNCTION SETUP
40
5. 3D Processing: Set reverberation mode .
6. HDCD: Set filter mode.
Optional settings: Off, Concert, Living Room, Hall, Bathroom, Cave, Arena, Church; Default: Off.
Optional settings: Off,1X, 2X; Default: 1X.
Treble Boost: Enhance high frequency sound level, optional settings: On, Off; default: Off.
Super Bass: Enhance very low frequency sound level, optional settings: On, Off; default: Off.
Optional settings: SPDIF/RAW, PCM; Default:SPDIF/ SPDIF/RAW
LPCM output: This item is used to set the output frequency of LPCM audio data
to fit for different power amplifiers.
Optional settings: 48K,96K; Default: 48K.
3. Dolby Digital Setup: Press [OK] or [ ] button to enter the submenu.
Dual Mono:
Dynamic:
Optional settings: Stereo, L-Mono, R-Mono, Mix-Mono ;Default: .Stereo
Optional settings: Off,1/4,1/2, 3/4, Full; Default: Off.
4. Equalizer : Press [OK] or [ ] button to enter the submenu to adjust the items.
EQ Type: Set equalizer type, optional settings: None, Rock, Pop, Live, Dance, Techno, Classic,
Soft; Default: None.
Bass Boost: Enhance low frequency sound level, optional settings: On, Off; default: Off.
SPDIF output: This item is used to set the bit stream type of the digital output.
SPDIF Setup Page
Setup SPDIF
LPCM Out
48K
SPDIF/PCM
SPDIF Output RAW
SPDIF/RAW
Dolby Digital Setup
Dual Mono (1+1) Setup
Dynamic
L-Mono
Dual Mono STR
Stereo
R-Mono
Mix-Mono
Equalizer Page
Select Equalizer Type
Bass Boost
EQ Type None
None
Pop
Live
Dance
Techno
Classic
Soft
Off
Super Bass
Treble Boost
Off
Off
Rock
NOTE: Only when the SPDIF output is set the SPDIF/PCM, the frequency of LPCM audio data
is optional.
To Next Page
Loading...
