To Next PageTo Next Page
Need help?Do you have a question about the AWA MHDV2245-O3-D0 and is the answer not in the manual?
Important safety information for service technicians regarding electrical hazards and proper repair procedures.
Instructions for safe and correct servicing, including lead dress, protective devices, and leakage current checks.
Regulations, warnings, and precautions for service personnel, including electrical shock and ESD risks.
Explanation of icons and symbols used in the service manual for clarity and understanding.
Identifies the main boards (A Board, B Board) and LVDS wire within the TV unit.
Details the function and connector definitions for the main board, including power and signal connections.
Explains the function of the power board and lists its connector definitions for power supply.
Details the function and connector pinout for the LCD panel, specifying LVDS signal connections.
Step-by-step guide on how to safely remove the TV pedestal, including screw removal.
Instructions for removing the rear back cover of the TV unit, indicating screw locations.
Procedure for removing adhesive tape, typically found during internal component access.
Instructions for connecting external devices like antennas, signal amplifiers, and splitters to the TV.
Guidance on connecting source devices via HDMI or DVI, including audio considerations and resolution settings.
Explanation of the buttons on the TV's front panel and their respective functions.
Details on the rear panel terminals, including AV, HDMI, and power connections.
Description of the remote control buttons and their functions for TV and DVD operation.
A schematic representation showing the functional blocks and interconnections of the TV's electronic components.
Comprehensive circuit schematics illustrating the electrical pathways and component connections within the TV.
Visual guide showing the physical wiring connections between different internal components and connectors.
Steps to detach and remove the power module from the TV assembly.
Instructions for disconnecting couplers and removing the main board assembly.
Procedure for detaching and removing the speaker components from the TV.
Steps to remove the remote control receiver board, including screw removal.
Procedure for accessing the factory service mode for adjustments and settings.
Steps for updating the TV's firmware via USB, ensuring correct operation.
Instructions to activate the hotel mode for specific hotel-related functionalities.
Common issues encountered with DVD playback and their potential solutions.
A guide for diagnosing common picture and audio problems through simple checks.
Flowchart for identifying and troubleshooting issues related to the main board.
Troubleshooting steps for identifying and resolving issues related to the LCD panel.
General