Why Awareness Technology Stat Fax 4200 Laboratory Equipment says 'Assay Cannot Be Edited!'?
This message indicates that you are trying to edit an OEM preprogrammed test that has a flag set to prevent editing.
Why does my Awareness Technology Stat Fax 4200 say '%Absorbance Mode should not be used with negative absorbances!'?
This message displays if you are in %Absorbance Mode and a standard is read which has a negative absorbance.
What does '******' mean on my Awareness Technology Laboratory Equipment?
This indicates that a sample has exceeded the absorbance of the reference well in a log-logit test. Specifically, Curve Axes is Y=Logit(Abs), X=Log(Conc), and Absorbance is greater than the reference (zero) absorbance value. It will also appear if a curve with a log axis tries to log a zero, a negative number, or an invalid curve has been read. It prints in the Concentration column whenever an error occurs while calculating the concentration.
Why does Awareness Technology Laboratory Equipment say 'Do not select the same filter for primary and differential'?
This message appears on Page 1 of Test Definition when the same wavelengths are entered for the Primary and the Differential filters.
General| Type | Microplate Reader |
|---|---|
| Light Source | Tungsten halogen lamp |
| Wavelength Range | 400 - 700 nm |
| Aspiration Volume | Not applicable |
| Power Requirements | 100-240 V, 50/60 Hz |
| Display | LCD |
| Printer | Optional |
| Read Mode | Endpoint and kinetic |
| Plate Type | 96-well microplates |
| Interface | RS-232 |
| Weight | 14 lbs (6.4 kg) |
To Next Page
