Press •
to turn the scale on.
Place the empty container onto the scale and wait for •
the display to stablize.
Press the •
key briey to zero the scale. The
TARE indicator will light up on the display.
You may now add the item(s) to be weighed to the •
container. The display will show only the weight of the
contents.
VII. Calibration
This scale has been calibrated before shipment. However,
re-calibration may be necessary from time to time. To
perform calibration, follow these instructions:
Press •
to turn the scale on and wait for the
display to show zero.
Tap the •
button 4 times and keep it held on the
4th tap.
Release the •
key when the display shows the
ISN number.
Tap the key again. The display will show “Zero” followed •
To Next Page
Loading...
