AWS LB-SERIES - Page 3

ON
MEM
OFF
CAL
MODE
TARE
PRINT
I. Part List
1. Scale
2. Expansion Bowl
3. 200g Calibration Weight (x2) *LB-1000 and LB-501 ONLY*
4. AA Batteries (x4)
5. 6V Power Supply
II. Key Description
III. Battery Installation
1. Before using the scale for the rst time, check
the battery compartment and remove any plastic
insulation strips or packaging that may be in place to
prevent battery drainage during shipping/storage.
2. If you are replacing the batteries, make sure the
positive and negative contacts are properly aligned.
OFF Key
ON/MEM Key
CAL / MODE Key
Backlight ON/OFF
TARE / PRINT Key
+
-
+
-
+
-
+
-