1. Important Safety Warning
Before Using the controller, please read all instructions and cautionary markings on the unit and
this manual. Store the manual where it can easily be accessed.
This manual includes all safety warnings, installation, and operation guidance of MWM wind
controllers.
➢ Before installing and using this controller, read all instructions and cautionary markings on the
controller and all appropriate sections of this guide.
➢ Do not store flammable products within the same control room or area where the wind controller
is installed.
➢ Do not open or dismantle any parts of the controller other than the required cable termination
cover where fitted.
➢ Disconnect the AC input and DC output from controller before working on or maintain the
controller. Do not work on the controller within 5 minutes of de energization.
➢ The controller is designed for indoor use only
➢ Maintain ventilation as detailed in this manual
➢ Install on noncombustible material only.
➢ The DC supply to the controller must be fused.
➢ Please use copper cable for line connection, and choose the right diameter of cable according to
the actual current.
➢ To avoid a risk of fire and electric shock, make sure the existing wiring is in good condition and
that the wire is connected tightly.
➢ Use anti oxidizing past on all connections.
To Next Page
Loading...
Need help?
General