Chart3: Dump Load with different power
3. Product Installation
3.1 Installation Notes
1) The controller must be kept indoors and well ventilated;
2) Environment temperature: -20～+40℃; Humidity: <=95%，no condensing
3) Altitude should not be more than 4000m (＞1000 m derating according to the GB/T3859.2
regulations).
4) Not to be installed in direct sunlight, sun exposure, rain, humidity, acid fog, and dust.
5) Ensure the correct battery voltage and polarity is connected to the controller.
6) The controller can only be connected to a wind turbine and PV within an the rated Voltage, current
and power characteristics.
To Next Page
Loading...
Need help?
General