I. Part List
1. Scale
2. CR2032 Batteries (x2)
II. Key Description
1. Unit Key - Changes the displayed unit of measure
2. ON/OFF/Tare Key - Tap to turn on or re-zero the scale (if
already on). Hold to turn the scale off.
III. Battery Installation
1. Beforeusingthescaleforthersttime,checkthebattery
compartment and remove any plastic insulation strips or
packaging that may be in place to prevent battery drainage
during shipping/storage.
2. If you are replacing the batteries, make sure the positive
and negative contacts are properly aligned:
1. 2.