AXELL BSF-3302 - User Access Levels; Change Password

Axell BSF-3302 61-200001 Series Repeater
Product Description and User’s Manual
© Axell Wireless Ltd Doc. No. PN 3302 61-200001 Series-UM Rev. 1.0 56
6.6.2 User Access Levels
In this generation of the system, standard users can be promoted to login via the Web Interface,
inheriting the Read-Write or Read-Only access to this interface.
There are five different access levels:
Access Level
Default User Levels
Read-Only
axell, avitec, omcuname, useradmin,
sysadmin
Read-Write
axell, avitec, omcuname, useradmin,
sysadmin
Web
axell, avitec
User Administrator
omcuname, useradmin, sysadmin
System Administrator
omcuname, sysadmin
NOTE: New users added to the system have read-only access.
Users may be promoted to read-write and/or web access using the ACT USERPROMOTE
command. See Common Commands and Attributes document for details on promoting users.
NOTE: Users omcuname, sysadmin and useradmin cannot be promoted to Web Access due to
security reasons.
6.6.3 Change Password
To prevent unauthorized access, it is highly recommended to change the default password of the
user.
NOTE: You can only change the password for the User Name with which the session was
accessed.
To change the Password
1. In the Main menu, click the Config button.
2. Click the Change Password button.
3. For the current User Name (e.g. axell):
● Enter the New password.
● Repeat the entry.
4. Click Apply.