AXELL BSF-3302 - Control Module Leds

Axell BSF-3302 61-200001 Series Repeater
Product Description and User’s Manual
© Axell Wireless Ltd Doc. No. PN 3302 61-200001 Series-UM Rev. 1.0 65
7.4.1 Control Module LEDs
The Control Module has four LEDs which give information regarding
the status of the BSF-3302.
If the BSF-3302 is configured for Ethernet communication the two
LEDs Modem Power and Modem Status do not fill any function and
can be disregarded.
Blue LED - Login
Quick flash
Control Module switched on, someone logged in
locally and/or remotely
Off (except for a quick flash
every 10th second)
Control Module switched on, no one logged in
Off (permanent)
Control Module switched OFF
Red LED - Status
Quick flash
Control Module switched on, one or more
errors/alarms detected
Off (except for a quick flash
every 10th second)
Control Module switched on, status OK
Off (permanent)
Control Module switched off
Green LED – Modem Power
On
Modem Power is on
Off
Modem Power is off
Green LED – Modem Status
On
Depending on type of call:
Voice call: Connected to remote party
Data call: Connected to remote party or
exchange of parameters while setting up or
disconnecting a call
Flashing
(irregular)
Indicates GPSR data transfer. When a GPRS
transfer is in progress the LED goes on within
1 second after data packets were exchanged.
Flash duration in approximately 0.5s.
75ms on/75ms off/75ms on/3s off
One or more GPRS contexts activated
75ms on/3s off
Logged to network (monitoring control
channels and user interactions). No call in
progress
600ms on/600ms off
No SIM card inserted, or no PIN entered, or
network search in progress, or ongoing user
authentications, or network login in progress
Off
Modem is off
Modem Status
Modem Power
Status
Login