AXING AG
Gewerbehaus Moskau
CH-8262 Ramsen
info@axing.com
www.axing.com
EN
Read and keep
State of the art 2013-01-28 - Reserving change in design and type - We cannot be held liable for printing errors
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2002/96/EC) and your
national law.
This product should be handed over to a designated collection point, e.g.,
on an authorized one-for-one basis when you buy a new similar product or
to an authorized collection site for recycling waste electrical and electronic
equipment (WEEE).
For more information about where you can drop off your waste equipment
for recycling, please contact your local city office, waste authority, approved
WEEE scheme or your household waste disposal service.
WEEE Nr.
DE14023300
OPERATION INSTRUCTIONS
Stripping Tool
BWZ 5-02
Technical data:
Stripping using the stripping block
Stripping dimension of AXING -line
antenna sockets 8/13 mm
Stripping dimension of Axing compression connector* 7/6 mm
SKB 88-xx
SKB 89-xx
SKB 395-xx
SKB 92-xx
SKB 93-xx
and cables with a dielectric diameter of 4,7 ± 1 mm
*CFS 93-xx/CFS 97-xx
premium
Note: Not suitable for cables with steel wire or stranded
steel wire
Stripping of cables 2,7-6,7 mm
Cutting blade for coaxial cables max. 8 mm
Ø
Ø
Cables that can be used:
Risk of cutting and crushing!
Do not place your fingers between the blades or
jaws of the stripper!
To Next Page
Loading...
General