Need help?Do you have a question about the Axiom CNC Series and is the answer not in the manual?
General| Model | Axiom CNC Series |
|---|---|
| Spindle Motor | Varies by model |
| Spindle Speed | Varies by model |
| Drive System | Varies by model |
| Control System | Varies by model |
| Table Size | Varies by model |
| Frame Construction | Varies by model |
| Software Compatibility | Varies by model |
| Power Requirements | Varies by model |
| Axis Configuration | Varies by model |
| Travel (X/Y/Z) | Varies by model |
| Tool Capacity | Varies by model |
| Power Supply | Varies by model |
Details the enclosure's construction, interlocked doors, E-Stop, and safety control panel.
Provides instructions on safely lifting and handling the heavy CNC router table assembly.
Offers guidance on using T-nuts and connectors for aluminium profile assembly.
Lists the components included in the Axiom Precision Stand packaging and hardware.
Details the tools required and step-by-step instructions for assembling the stand.
Instructions for installing the toolbox into the stand assembly.
Final steps for fixing the enclosure base to the stand assembly.
Lists the necessary conditions for operating the Axiom CNC machine with the safety enclosure.
Explains the "Reset Logic is Active" message and how to diagnose it using the UCCNC diagnostic screen.
To Next Page
