AXIOMET AX-3003D User Manual

7
OUTPUT VOLTAGE
Regulated
OUTPUT CURRENT
Regulated
FUSE TYPE
Line 220VAC
FUSE TYPE
Line 110VAC
0 ~ 15V
0 ~ 2A T 1A L 250V T 2A L 250V
0 ~ 3A T 1A L 250V T 2A L 250V
0 ~ 18V
0 ~ 2A T 1A L 250V T 2A L 250V
0 ~ 3A T 1A L 250V T 2A L 250V
0 ~ 30V
0 ~ 2A T 1A L 250V T 2A L 250V
0 ~ 3A T 2A L 250V T 4A L 250V
0 ~ 5A T 3.15A L 250V T 6.3A L 250V
0 ~ 10A T 5A L 250V T 10A L 250V
0 ~ 20A T 8A L 250V T 15A L 250V
0 ~ 50V
0 ~ 2A T 2A L 250V T 4A L 250V
0 ~ 3A T 3.15A L 250V T 6.3A L 250V
4. AC POWER INPUT
WARNING
To avoid user for injury and the instrument for damage, the
voltage value of AC power must be examined with same the power
requirements of instrument before connect power cord to live
power source.
WARNING
To avoid electrical shock, disconnect power cord from live power
source and remove the test leads and any input signals before
replacing the power fuses. Replace it only with the same type of
fuses.
CHAPTER 2. OPERATION
Introduction
WARNING
To avoid electric shock or personal injury, read “Safety
Precautions” and “Safety Information” before Operation.
Before making any operation always examine the DC power supply and accessories used with it for
damage, contamination (excessive dirt, grease, etc.) and defects. Examine the test leads for
cracked or frayed insulation and make sure the lead plugs fit snugly into the output jacks. If any
abnormal exist do not attempt to make any operation.

AXIOMET AX-3003D Specifications

General

Brand	AXIOMET
Model	AX-3003D
Category	Power Supply
Language	English