19
Operation and keys
PRESET
The “PRESET“ function enables you to save the station in the
memory of the relevant level (BAND), which can then be
accessed via the station keys. Pre-set FM frequencies can
likewise be changed with the“PRESET“ menu.
“PRESET“ should be pressed and held to access memory menu.
Then use “OK“ to select desired memory level (BAND) for saving
and also use “OK“ to allocate the station to the program
destination (P1 to P4).Successful saving is marked by a display
message showing e.g. ”P1 SAVED“.
The station previously saved to the program destination is then
overwritten. The display shows relevant memory levels: BAND
1, BAND 2, BAND 3, program destinations P1, P2, P3, P4, and
station names.
Resetting the DAB station memory (DABRESET) is covered in the
“MENU“ section, and system settings remain unchanged.
To change the FM frequency, press and hold “PRESET“, using
arrow keys, until ”LINK FM“ appears on your radio display and
use “OK“ to select save destination (F1, F2, F3, F4). Now the
desired FM frequency can be set with arrow keys and saved in
destinations F1 to F4 with ”OK“.
IMPORTANT!
User-defined FM frequencies are removed, when restoring
factory settings (FACTORY). The factory pre-set FM frequencies
are as follows:
- F1- 87.6 MHz
- F2- 92.5 MHz
- F3- 102.5 MHz
- F4- 107.9 MHz
To Next Page
