Axis 0810-004 - Page 58

AXISM1065-LWNetworkCamera
Aboutsystemoptions
Important
Toensuresuccessfulcerticatevalidation,timesynchronizationshouldbeperformedonallclientsandserverspriorto
conguration.
HowtocongurethewirelesssettingsusingWPA
TM
-/WPA2-EnterpriseandEAP-TLS
1.GotoSystemOptions>Security>Wireless.
2.IntheSSIDeld,typethenameofthewirelessnetwork.
3.UnderSecurity,selectWPA-/WPA2–Enterprise.
4.UnderWPA-Enterprisetype,selectEAP-TLS.
5.EntertheuserIdentityassociatedwithyourcerticate.
6.SelecttheEAPOLversion(1or2)asusedintheaccesspoint.
7.SelecttheCAcerticateandtheclientcerticatetouseforwirelessauthentication.
8.ClickSave.
AboutEAP-PEAP/MSCHAPv2
TheauthenticationprotocolEAP-PEAP/MSCHAPv2(ExtensibleAuthenticationProtocol-ProtectedExtensibleAuthentication
Protocol/MicrosoftChallengeHandshakeAuthenticationProtocol)allowstheclienttoauthenticatethenetworkusingadigital
certicateprovidedbyaCerticationAuthority.Thenetworkauthenticatestheclientusinganidentityandapassword.Togain
accesstotheprotectednetwork,theAxisproductpresentsitsidentityandpasswordtothenetworkaccesspoint.Ifthesecredentials
areapproved,theaccesspointallowsaccessonapreconguredport.
Important
Toensuresuccessfulcerticatevalidation,timesynchronizationshouldbeperformedonallclientsandserverspriorto
conguration.
HowtocongurethewirelesssettingsusingWPA
TM
-/WPA2-EnterpriseandEAP-PEAP/MSCHAPv2
1.GotoSystemOptions>Security>Wireless
2.IntheSSIDeld,typethenameofthewirelessnetwork.
3.UnderSecurity,selectWPA-/WPA2–Enterprise.
4.UnderWPA-Enterprisetype,selectEAP-PEAP/MSCHAPv2.
5.EntertheuserIdentityassociatedwithyourcerticate.
6.EnterthePasswordforyouruseridentity.
7.SelectthePEAPVersion(0or1)asusedintheaccesspoint.
8.SelectthePEAPLabelthattheaccesspointuseswhenusingPEAPversion1.Select1touseclientEAPencryption;select
2touseclientPEAPencryption.
9.SelecttheEAPOLversion(1or2)asusedintheaccesspoint.
10.SelecttheCAcerticatewithwhichtovalidatethenetwork/APcerticate.
11.ClickSave.
57