Axis 211W Specifications

Technical specications – AXIS 211W Network Camera
www.axis.com
©2009 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modications without notice.
33169/EN/R2/0904
Camera
Image sensor 1/3” Progressive scan RGB CMOS VGA
Lens Varifocal 3.0 - 8.0 mm, F1.0, DC-iris, CS mount
Horizontal angle of view: 27° – 67°
Minimum
illumination
0.75 lux, F1.0
Shutter time 1/15000 s to 1/4 s
Video
Video
compression
MPEG-4 Part 2 (ISO/IEC 14496-2)
Motion JPEG
Resolutions 640x480 to 160x120
Frame rate
MPEG-4
Up to 30 fps in all resolutions
Frame rate
Motion JPEG
Up to 30 fps in all resolutions
Video streaming Simultaneous MPEG-4 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR MPEG-4
Image settings Compression, color, brightness, sharpness, contrast, white
balance, exposure control, fine tuning of behavior at low light,
rotation
Text and image overlay
Privacy mask
Audio
Audio streaming Two-way (full and half duplex)
Audio
compression
G.711 PCM 8 kHz
G.726 ADPCM
Configurable bit rate
Audio input/
output
Built-in microphone, external microphone input or line input,
line output
Network
Wireless interface IEEE 802.11g/b
Security WEP 64/128 bit, WPA/WPA2-PSK, WPA/WPA2-Enterprise
(EAP-TLS, EAP-PEAP/MSCHAPv2)
Password protection, IP address filtering, HTTPS encryption,
IEEE 802.1X network access control
Supported
protocols
IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, RTSP, RTP, TCP,
UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, WPA-/WPA2-PSK,
WPA-/WPA2-Enterprise, EAP-TLS, EAP-PEAP/MSCHAPv2, WEP
System integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Intelligent video Video motion detection, audio detection
Alarm triggers Intelligent video and external input
Alarm events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video buffer 36 MB pre- and post alarm
General
Processors and
memory
ARTPEC-A, 64 MB RAM, 8 MB Flash
Power 7 – 20 V DC max. 5 W
Power over Ethernet IEEE 802.3af Class 2
Connectors RJ-45 10BASE-T/100BASE-TX PoE, Auto-MDIX
Terminal block for 1 alarm input, 1 output and alternative power
connection
Reverse SMA for radio
3.5 mm mic/line in, 3.5 mm line out
Operating
conditions
0 – 45 °C (32 – 113 °F)
Humidity 20 – 80% RH (non-condensing)
Approvals EN 301 489-1, EN 301 489-17, EN 300 328,
FCC Part 15 Subpart B and C Class B, RSS-210, TELEC,
AS/NZS 4711, MIC
Power supply: EN 60950-1, UL, cUL
Weight 240 g (0.5 lb.)
Included
accessories
Power supply, stand, terminal connector kit, antenna, antenna
connector lid, Installation Guide, CD with installation tools,
recording software and User’s Manual, Windows decoder
1-user license
More information is available at www.axis.com
Optional accessories
Outdoor antenna
Various housings
For information on AXIS Camera Station and
video management software from
Axis’ Application Development Partners, see
www.axis.com/products/video/software/
Dimensions
80 mm (3.2”)
64 mm (2.5”)
5 mm (0.2”) (x3)
30 mm (1.2”)
88 mm (3.5”)
155 mm (6.1”)
40 mm (1.6”)
132 mm (5.2”)
132 mm (5.2”)
108 mm (4.2”)
82 mm (3.2”)
80 mm (3.2”)
64 mm (2.5”)
5 mm (0.2”) (x3)
30 mm (1.2”)
88 mm (3.5”)
155 mm (6.1”)
40 mm (1.6”)
132 mm (5.2”)
132 mm (5.2”)
108 mm (4.2”)
82 mm (3.2”)
80 mm (3.2”)
64 mm (2.5”)
5 mm (0.2”) (x3)
30 mm (1.2”)
88 mm (3.5”)
155 mm (6.1”)
40 mm (1.6”)
132 mm (5.2”)
132 mm (5.2”)
108 mm (4.2”)
82 mm (3.2”)
Lightning protector

Axis 211W Specifications

General

Brand	Axis
Model	211W
Category	Security Camera
Language	English