Need help?Do you have a question about the Axis 2100 and is the answer not in the manual?
General| Category | Security Camera |
|---|---|
| Sensor Type | CCD |
| Resolution | 640 x 480 |
| Resolutions | 640 x 480, 320 x 240 |
| Frame Rate | 30 fps |
| Lens Type | Fixed |
| Aperture | F2.0 |
| Minimum illumination | 1.5 lux |
| Video Compression | Motion JPEG |
| Security | Password protection |
| Power Supply | 5 V DC |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Image sensor | 1/4" CCD |
| Lens | 4mm |
| Focal Length | 4mm |
| Viewing angle | 54° |
| Shutter Speed | 1/4 - 1/10000 sec |
| Network Interface | 10BaseT/100BaseTX |
| Network Protocols | HTTP, TCP, UDP, DHCP, DNS, FTP |
| Protocols | RTSP, RTP, RTCP |
General description of the AXIS 2100 network camera and its capabilities.
Details on ease of use, installation, standards, image quality, and connection types.
Identifies and describes all physical connectors and indicators on the camera.
Instructions for unpacking, verifying hardware, and mounting the camera.
Step-by-step guide for installing the camera on an Ethernet network.
Steps to confirm successful camera connection and access via a web browser.
Overview of modem setup methods, Null Modem Cable connection, and dial-up procedures.
Detailed steps for connecting via Null Modem Cable for initial configuration.
Procedure for establishing and configuring a dial-up connection.
Steps to start the modem connection and confirm access via browser.
Overview of Wizards, Administration Tools, and preparation steps.
Managing security settings, user accounts, and access rights.
Procedure for restoring the camera to its original factory default settings.
Overview of network and modem application possibilities.
Setting up the camera for live video display on a custom web page.
Configuring the camera to upload images sequentially to a remote FTP server.
Configuring the camera to upload images triggered by alarm or time-based events.
Using the Focus Assistant and rotational control for optimal focus.
Detailed steps for focusing the camera under stable conditions.
Instructions for safely removing and replacing the camera's lens.
Overview of audio module capabilities, installation, and configuration.
Steps to configure audio modes, clients, and settings via camera administration.
Common issues and solutions for the AXIS 2191 Audio Module.
Detailed technical data and specifications for the audio module.
Answers to common user queries and problems encountered with the AXIS 2100.
Using the PING utility to test network connectivity and diagnose IP address issues.
Common network access problems, their causes, and recommended solutions.
Information on obtaining and performing firmware updates for the camera.
Alternative methods for assigning an IP address to the camera.
Information on serial (RS232) and IO connectors, their pinouts, and functions.
Example schematics for connecting door switches and LED indicators to the IO connector.
Considerations for IP addresses and NAT with high-speed internet services.
Using routers, firewalls, and WinGate software for network access.
Comprehensive technical specifications including system requirements, hardware, and power.
To Next Page
