Need help?Do you have a question about the Axis 221 and is the answer not in the manual?
General| Maximum resolution | 640 x 480 pixels |
|---|---|
| Supported video modes | - |
| Video formats supported | MPEG4 |
| Camera shutter speed | 1/25000 - 2 s |
| Minimum illumination | 0.08 lx |
| Sensor type | CCD |
| Progressive scan | Yes |
| Optical sensor size | 1/3 \ |
| Optical zoom | - x |
| Focus adjustment | 1.0 |
| Focal length range | 3 - 8 mm |
| Built-in HDD | No |
| Flash memory | 8 MB |
| Internal memory | 32 MB |
| Type | IP security camera |
| Certification | EN 55022 B, EN 55024, EN 61000-3-2, EN 61000-3-3, \\r EN 61000-6-1, EN 61000-6-2, FCC 5 B B, \\r VCCI B, C-tick AS/NZS CISPR22, ICES-003 B, \\r EN 60950-1 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Bullet |
| Product color | Gray |
| Housing material | Aluminum |
| Ethernet LAN (RJ-45) ports | 1 |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| AC input voltage | 24 V |
| Power source type | PoE |
| Power consumption (typical) | 7.5 W |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Compliance industry standards | IEEE 802.3a |
Weight and Dimensions| Weight | 550 g |
|---|
Details the procedure and precautions for replacing the internal real-time clock battery.
Details the physical components and connections of the AXIS 221 Network Camera, including front and rear panels.
Provides step-by-step instructions for accessing the camera's interface using a web browser.
Details the process for setting the initial root password for secure access to the camera.
Outlines the steps to access the camera's setup interface from a web browser.
Explains how to set up FTP, HTTP, and TCP servers to receive uploaded images and notification messages.
Details how to set up triggered and scheduled events, including motion detection and response actions.
Advises checking the current firmware version to identify potential solutions for problems.
Details the process for downloading and installing the latest firmware for the AXIS 221 camera.
Offers steps to recover the camera if a firmware upgrade process fails or is interrupted.
To Next Page
