AXIS A8004-VE installation
Relay powered by PoE (12V)
Configure relay state in AXIS A8004-VE
built-in web pages
Relay Door DoorRELAY1
Name Port TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
-
NO/
NC
NO/
NC
CO CO12V
PoE+ Switch