Need help?Do you have a question about the Axis I8116-E and is the answer not in the manual?
General| Audio Compression | AAC, G.711, G.726 |
|---|---|
| Video | Yes |
| Camera | Yes |
| Tampering Alarm | Yes |
| Audio | Yes |
| Microphone | Yes |
| Speaker | Yes |
| Network Interface | Ethernet |
| Power over Ethernet (PoE) | Yes |
| Network Protocols | ARP, DHCP, DNS, HTTP, HTTPS, ICMP, IGMP, IPv4, IPv6, NTP, RTP, RTSP, SMTP, SNMP, TCP, UDP |
| Weather Resistance | IP66 |
| Protocols | SIP |
| Model | Axis I8116-E |
Locate and assign IP addresses to Axis devices on the network using tools.
Open the device's configuration and control interface through a web browser.
Securely set the initial administrator password for the device.
Ensure the device's firmware has not been tampered with.
General understanding of the device's web interface functionality.
Configure fundamental device parameters like power line frequency.
Modify the administrator password for enhanced device security.
Set up peer-to-peer SIP communication for direct device calls.
Integrate the device into a PBX system for external SIP calls.
Add entries to the device's contact list for initiating calls.
Customize the behavior of the physical call button.
Enable door unlocking functionality using DTMF signals.
Optimize image quality by configuring various visual parameters.
Choose an exposure mode to improve image quality in different lighting conditions.
Create rules to automate actions based on specific events.
View essential device info, firmware, and time sync status.
Configure Session Initiation Protocol for voice and video calls.
Adjust video parameters like resolution, frame rate, and compression.
Set up and configure connected card readers for access control.
Manage audio input, output, and noise cancellation.
Control and manage audio and video recordings.
Install and manage applications on the device.
Configure system parameters like date, time, and network.
Manage certificates, network security protocols, and user access.
Add, configure, and manage user accounts with different roles.
Define conditions and actions for automated event responses.
Configure network and onboard storage for recordings.
Perform device maintenance like restart, restore, and firmware upgrades.
Understand the technologies behind Voice over IP communication.
Learn about SIP for setting up, maintaining, and terminating VoIP calls.
Explore how PBX systems facilitate external SIP communication.
Understand how to access the device from outside a private network.
Compare video compression methods like Motion JPEG and H.264.
Discover security measures like signed firmware, secure boot, and Edge Vault.
Identify the physical components and features of the device.
Understand the meaning of different status LED indications.
Information and precautions for using the onboard SD card slot.
Details on network, I/O, reader, and relay connectors.
Diagram for connecting an Axis reader to the device.
Wiring for relay power via PoE or separate supply.
Connect 12V fail-secure locks powered by PoE or external supply.
Restore the device to its original factory settings.
Resolve problems related to firmware installation and post-upgrade issues.
Troubleshoot issues with setting or accessing the device's IP address.
Solve problems preventing access to the device via a web browser.
Understand factors affecting device performance and frame rate.
Information on how to get assistance from Axis support.
To Next Page
