Need help?Do you have a question about the Axis A8105-E and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Form factor | Cube |
| Mounting type | Wall |
| Product color | White |
| LED indicators | Status |
| Housing material | Aluminum |
| International Protection (IP) code | IP65 |
| Maximum resolution | 1920 x 1200 pixels |
| Image quality adjustment | Brightness, Colour depth, Contrast, Sharpness |
| Video compression formats | H.264, MPEG4 |
| Minimum illumination | 0 lx |
| Sensor type | CMOS |
| Lens diameter | 2.8 mm |
| Security algorithms | HTTPS |
| Built-in HDD | No |
| Flash memory | 128 MB |
| Internal memory | 256 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| DC output voltage | 12 |
| Power source type | PoE |
| Number of cameras | 1 |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 35 mm |
|---|---|
| Width | 48 mm |
| Height | 147.5 mm |
| Weight | 280 g |
Prepare for initial mounting, indicating tool usage and screw insertion.
Specifies recommended mounting heights and physical dimensions for installation.
Illustrates routing for I/O and network cables through the wall.
Details the connection of the network cable to the device's backplate.
Shows cable routing within the backplate with specified maximum cable lengths.
Illustrates the process of securing the mounting backplate to the wall with screws.
Details connecting external power and I/O wires to the terminal block.
Demonstrates the insertion of a microSD card into its slot within the device.
Details specific safety instructions and requirements for UL294 certification.
To Next Page
