Axis A8105-E Installation Manual

AXIS A8105-E installation
Relay powered by PoE (12V)
Relay Door DoorRELAY
Name Port TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
Configure relay state in AXIS A8105-E built-in
web pages
12V l01 l02
CO
NO/ NC

Axis A8105-E Specifications

General

Type	IP security camera
PTZ control	Yes
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Form factor	Cube
Mounting type	Wall
Product color	White
LED indicators	Status
Housing material	Aluminum
International Protection (IP) code	IP65
Maximum resolution	1920 x 1200 pixels
Image quality adjustment	Brightness, Colour depth, Contrast, Sharpness
Video compression formats	H.264, MPEG4
Minimum illumination	0 lx
Sensor type	CMOS
Lens diameter	2.8 mm
Security algorithms	HTTPS
Built-in HDD	No
Flash memory	128 MB
Internal memory	256 MB
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC
DC output voltage	12
Power source type	PoE
Number of cameras	1
Harmonized System (HS) code	85258900

Weight and Dimensions

Depth	35 mm
Width	48 mm
Height	147.5 mm
Weight	280 g