2.If you change the default installation direction of the FC (the default is that the arrow is facing forward), for
example, if the arrow is facing backward, you need to change the default yaw from 0° to 180° on the "Flight
Control and Sensor Orientation" page. After changing, click Save and reboot.
3.If you use TBS receiver, ELRS receiver, please
select the receiver protocol in the "Receiver" page
as CRSF, if you use DJI FPV remote controller, DJI
FPV remote controller 2, and other SBUS
receivers, please select SBUS.
To Next Page
Loading...
