Need help?Do you have a question about the Axis A1001 and is the answer not in the manual?
General| Interface | RS-485 |
|---|---|
| Built-in UPS | - |
| Maximum number of doors | 2 door(s) |
| DC voltage range | 10 - 30 V |
| Power consumption (typical) | 26 W |
Weight and Dimensions| Depth | 45.3 mm |
|---|---|
| Width | 180 mm |
| Weight | 500 g |
Covers product liability, intellectual property rights, equipment modifications, and trademark acknowledgments.
Details regulatory compliance, safety standards, and disposal guidelines for the product.
Instructions for accessing the product's interface via a web browser.
Guidance on configuring network settings for external access to the product.
Procedure for setting the initial administrator password for secure access.
Steps to configure the physical hardware connections for doors, readers, and locks.
Options for configuring door lock behavior, access times, and unlock settings.
Settings for reader communication protocols and REX device integration.
Recommended procedures for regular system maintenance and verification.
Defining rules for when doors can be accessed based on time and identification types.
Creating and managing user groups to control access rights and schedules.
Configuring door settings, identification types, and access schedules for each door.
Setting up user profiles, credentials (card, PIN), and managing user access rights.
Defining which system events are logged and trigger alarms.
Setting up automated actions based on specific system events and conditions.
Understanding and configuring reader feedback signals like LEDs and beepers.
Configuring user access control, passwords, IP address filtering, and HTTPS.
Setting up TCP/IP, DNS, NTP, DHCP, and dynamic DNS services for network connectivity.
Accessing maintenance functions, support information, and system overviews.
Diagnosing firmware problems, upgrading, and performing emergency recovery.
Common problems, their causes, and recommended solutions for product operation.
Detailed technical specifications for the AXIS A1001 Network Door Controller.
Technical details for the AXIS Entry Manager software and its features.
Overview of connectors and reference to connection diagrams for hardware setup.
To Next Page
