Axis ArgusF7Pro/65AStack User Manual

Argus F7Pro/65A Stack
Both the FC and the ESC are designed with CNC full aluminum cover wrapped, which has excellent protection and efficient heat
dissipation, it protects internal electronics from grass juice and dirt. The aluminum casing significantly enlarge the radiating
surface to quickly dissipates the internal heat for stable performance.
The FC adopts a plug-and-play design, and common peripherals such as DJI O3 air unit, GPS, etc. Can be directly connected
and used, which is simple and fast.
The FC supports up to 8 motor outputs, making it easy to build an X8 drone. In addition, it also integrates 5V/9V dual BEC, and
the 9V BEC can provide independent power supply for VTX to ensure stable operation.
The FC has 4 LED status indicators, which respectively display the working status in different states. Others such as the F722
main control chip, onboard OSD chip, onboard barometer, and onboard black box chip are also readily available.
The ESC adopts large-size MOSFETs with low internal resistance and low heat generation. The high-performance main control
chip G071 has a main frequency of up to 64MHz and supports up to 16-96k PWM frequency adjustment. The combination of
software and hardware brings a silky flight experience.
Description of product characteristics：

Axis ArgusF7Pro/65AStack Specifications

General

Type	Controller
Model	ArgusF7Pro/65AStack
Manufacturer	Axis
Controller Type	FPGA-based
Communication	Ethernet, CAN, Serial
Certifications	CE, FCC, RoHS

Summary

Product Description and Characteristics

FC Specifications

ESC Specifications

Peripheral Connection Diagrams

DJI Air Unit Connection

Details the wiring and connection for DJI Air Unit peripherals.

Analog VTX Connection

Analog Camera Connection

Receiver Setup and Connection

GPS Module Setup

Beeper and LED Light Belt Configuration

ESC Connections and Notes

FC Connections Overview

Betaflight Configuration Instructions

FC Port Settings

Explains factory default port settings for the Flight Controller.

Board and Sensor Alignment

How to adjust FC installation direction and sensor orientation.

Receiver Protocol Selection

Selects receiver protocol based on receiver type (CRSF, SBUS).

Motor Configuration and Mixer Settings

Mixer and Motor Direction

Sets up the motor mixer and controls motor rotation direction.

X8 FC Parameter Setting Steps

X8 Motor Configuration

Guides through setting up eight motors for X8 configurations.

ESC Operation and Setup Notes

Amperage Meter Configuration

FC Shipping List

ESC Shipping List

Stack Shipping List