What to do if my Axis Car Stereo System has no sound or power?
If your Axis Car Stereo System has no sound or power, first check that all the power and speaker leads are securely connected. Also, check the fuse and replace it with one of the same amperage if it's blown.
What to do if there is no sound in one channel of my Axis AX1300BT Car Stereo System?
If you're experiencing no sound in one channel of your Axis Car Stereo System: * Check the balance control. * Reverse the left and right channel speaker leads. If there's still no sound from the other side, check or replace the speaker wire. If there's no sound from either side, replace both speakers.
Essential safety and placement advice for a secure and proper installation.
Depicts ISO connector wiring for power, speakers, antenna, and microphone.
Guidance on powering the unit on/off, muting, and adjusting volume.
How to adjust EQ, loudness, speakers, stereo/mono, and clock settings.
Methods for searching tracks by number, character, or folder.
Connecting and using USB storage and memory cards for playback.
Pairing a phone, handling calls, and Bluetooth audio streaming.
Common issues, their causes, and recommended solutions.
General| Bluetooth | Yes |
|---|---|
| USB | Yes |
| AUX Input | Yes |
| SD Card Reader | Yes |
| Remote Control | Yes |
| Equalizer | Yes |
| Radio Tuner | FM |
To Next Page
