Axis C1410 - Set Up Direct SIP (P2 P)

AXISC1410NetworkMiniSpeaker
Additionalsettings
Note
Someemailprovidershavesecurityltersthatpreventusersfromreceivingorviewinglargeattachments,from
receivingscheduledemailsandsimilar.Checktheemailprovider’ssecuritypolicytoavoiddeliveryproblemsand
lockedemailaccounts.
2.8ClickSave.
3.Setuptheautomatedspeakertest:
3.1Gotothedeviceinterface>System>Events>Rules.
3.2ClickAddarule.
3.3Enteranamefortherule.
3.4UnderCondition,selectScheduleandselectfromthetriggerlist
3.5UnderSchedule,selectyourschedule(“Dailyat6pm”).
3.6UnderAction,selectRunautomaticspeakertest.
3.7ClickSave.
4.Setuptheconditionforsendinganemailwhenthespeakertestfails:
4.1Gotothedeviceinterface>System>Events>Rules.
4.2ClickAddarule.
4.3Enteranamefortherule.
4.4UnderCondition,selectSpeakertestresult.
4.5UnderSpeakerteststatus,selectDidn’tpassthetest.
4.6UnderAction,selectSendnoticationtoemail.
4.7UnderRecipient,selectyourrecipient(“Speakertestrecipients”)
4.8Enterasubjectandamessage,andclickSave.
SetupdirectSIP(P2P)
Usepeer-to-peerwhenthecommunicationisbetweenafewuseragentswithinthesameIPnetworkandthereisnoneedforextra
featuresthataPBX-servercouldprovide.TobetterunderstandhowP2Pworks,seePeer-to-peerSIP(P2PSIP)onpage11.
Formoreinformationaboutsettingoptions,seeSIPonpage26.
1.GotoSystem>SIP>SIPsettingsandselectEnableSIP.
2.Toallowthedevicetoreceiveincomingcalls,selectAllowincomingcalls.
3.UnderCallhandling,setthetimeoutanddurationforthecall.
4.UnderPorts,entertheportnumbers.
-SIPport–ThenetworkportusedforSIPcommunication.Thesignalingtrafcthroughthisportisnon-encrypted.
Thedefaultportnumberis5060.Enteradifferentportnumberifrequired.
-TLSport–ThenetworkportusedforencryptedSIPcommunication.Thesignalingtrafcthroughthisportis
encryptedwithTransportLayerSecurity(TLS).Thedefaultportnumberis5061.Enteradifferentportnumber
ifrequired.
7