Axis D3110 - Page 8

AXISD3110ConnectivityHub
Configureyourdevice
-Host:BrokerIPaddress
-ClientID:ForexampleCamera1
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-ThebrokerUsernameandPassword
2.ClickSaveandConnect.
CreatetworulesinthecameraforMQTTpublishing
1.GotoSystem>Events>Rulesandaddarule.
2.Enterthefollowinginformation:
-Name:Motiondetected
-Condition:Applications>Motionalarm
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:On
-QoS:0,1or2
3.ClickSave.
4.Addanotherrulewiththefollowinginformation:
-Name:Nomotion
-Condition:Applications>Motionalarm
-SelectInvertthiscondition.
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:Off
-QoS:0,1or2
5.ClickSave.
SetuptheMQTTclientintheconnectivityhub
1.Intheconnectivityhub’sdeviceinterface,gotoSystem>MQTT>MQTTclient>Brokerandenterthefollowing
information:
-Host:BrokerIPaddress
-ClientID:Port1
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-UsernameandPassword
2.ClickSaveandConnect.
8