Need help?Do you have a question about the Axis S2008 and is the answer not in the manual?
General| Brand | Axis |
|---|---|
| Model | S2008 |
| Category | Network Hardware |
| Language | English |
Guide to setting up the appliance in a standalone network for surveillance.
Instructions for integrating the appliance into an existing network infrastructure.
Provides an overview of the integrated PoE switch and its purpose for traffic segregation.
Steps to access the switch's management interface and reboot the device.
Methods to secure ports by locking MAC addresses to prevent unauthorized access.
Steps to disable unused ports to enhance network security and prevent unauthorized connections.
Guidance on changing the switch's IP address and setting up its DHCP server.
Process to reset the switch to factory defaults and change the administrator password.
Procedures for creating a backup and restoring switch configuration settings.
Instructions for creating VLANs and encrypting switch webpage traffic with HTTPS.
Information on the Overview tab for status and the PoE tab for power management.
Details on configuring Access Control Lists (ACL) and Virtual LANs (VLANs).
Settings for secure HTTPS connections and network configuration like IP and DHCP.
Management of firmware, passwords, and switch maintenance operations.
Illustrates and describes the components on the front panel of the appliance series.
Details the back panel connectors and explains the function of system LEDs.
To Next Page
