Axis S2008 - Factory Reset and Password Management; Settings Backup and Restore

AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
Howtoresettheswitchtofactorydefaultsettings
Note
Ifyou’veforgottenyournewIPaddressorpasswordandcan’taccesstheswitch,contactAxissupport.
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickResettofactorydefault.
4.Reboottheswitch.
Howtochangetheswitch'spassword
Youcanchangethedefaultpasswordtoapasswordyouchooseyourself.
Important
Makesureyouselectapasswordyouremember.Ifyou’veforgottenthenewpassword,contactAxissupport.
1.Opentheswitch’swebpage.
2.GotoAdmin>Security.
3.EnterUsernameandPassword.
4.EntertheNewpasswordandconrmit.
5.ClickSave.
6.Reboottheswitch.
Howtobackuptheswitch'ssettings
Note
Theusernameandpasswordarenotincludedinthebackuple.
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickBackupsettings.
4.Savethe.gzle.
Howtorestoretheswitch'ssettingstopreviousbackup
Note
Torestoretheswitch’ssettingsyoumustpreviouslyhavecreatedabackuple.
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickBrowse.
4.Selecttheappropriate.gzle.Makesurethatthemodelnameandserialnumberinthelenamematchyourdevice.
5.ClickRestore.Oncethesettingsarerestored,theswitchwillautomaticallyreboottoacceptallrestoredchanges.
9