To Next PageTo Next PageWhat to do if the Axis T8154 Network Hardware midspan does not power up?
If the Axis Network Hardware midspan doesn't power up, try the following: Unplug and then re-plug the midspan’s power cable, and check the power LED indicator status during the power-up sequence. Also, verify that the power inlet voltage is between 100–240 V AC and ensure that the power inlet cable is intact and functional.
What to do if the remote device connected to the Axis T8154 Network Hardware midspan does not power up?
If the remote device connected to the Axis Network Hardware midspan does not power up, consider these steps: * Verify that the remote device is designed for PoE operation. * Ensure the remote device is connected to the midspan’s DATA PWR OUT port using a standard STP CAT5 or higher, straight-wired network cable with four pairs. * If an external power splitter is in use, verify that it works. * Check for any short circuits on the twisted pair cables or RJ45 connectors. * If possible, connect the remote device to a different midspan.
What to do if the remote device connected to the Axis Network Hardware midspan powers up but there is no data link?
If the remote device connected to the Axis Network Hardware midspan powers up but there is no data link, check the following: 1. If using an Ethernet RJ45 cable, verify that it is a standard STP CAT5 or higher, straight-wired network cable with four pairs. 2. If using an Ethernet RJ45 cable, verify that its length between the network switch and the remote device is less than 100 m (330 ft). 3. If using an optical fibre cable, verify that the cable and the SFP module are of the correct type, and that the cable is intact and functional. 4. If possible connect the remote device to a different midspan.
General| Data Transfer Rate | 10/100/1000 Mbps |
|---|---|
| Input Voltage | 100-240 V AC |
| Power over Ethernet (PoE) | Yes |
| PoE Standard | IEEE 802.3at |
| Product Type | PoE Midspan |
| Output Current | 0.6 A |
Covers Axis AB's liability, IP rights, modification restrictions, and trademark acknowledgments.
Details European CE marking, LVD, RoHS, and regional EMC compliance (USA, Canada, Europe).
Explains EMC design, testing for RF emission, and immunity standards.
Outlines EMC compliance for USA, Canada, and Europe, including specific standards and warnings.
Provides contact details, warranty links, and directs to online training and documentation.
Covers safety standards compliance (IEC/EN/UL 60950-1) and product disposal instructions.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE levels for potential risks.
Defines "Important" and "Note" message levels for product operation and usage.
Provides critical safety instructions for installation, usage, storage, and cleaning of the product.
Advises using original or equivalent packaging to prevent damage during transportation.
Lists the items included in the product package: the midspan, power cable, and printed materials.
Identifies and labels the key hardware components and ports of the AXIS T8154 60 W SFP Midspan.
Illustrates and describes two methods for connecting the midspan to a network switch.
Details connecting the midspan to the camera and a power outlet.
Instructs users to verify LED indicators for correct status after installation.
Provides links to the latest documentation, online training, and webinars on axis.com.
Directs users to axis.com for a list of optional accessories and warranty details.
Details the function and status indication of Power and Port LEDs.
Specifies the operating temperature and humidity ranges for the product.
Lists input voltage, current, output power, and nominal output voltage.
Describes the specifications for DATA IN (Ethernet, SFP) and DATA & POWER OUT interfaces.
Provides corrective actions for when the midspan fails to power up.
Offers solutions for when the connected remote device does not power up.
Provides corrective actions for when the remote device powers up but lacks a data link.
