Axis D4100-E - Create a rule in the strobe siren; Activate strobe siren over MQTT when camera detects motion

AXISD4100-ENetworkStrobeSiren
Configureyourdevice
Createaruleinthestrobesiren
1.Inthestrobesiren’sdeviceinterface,gotoSystem>Eventsandaddarule.
2.Enterthefollowinginformation:
-Name:Triggeronvirtualinput1
-Condition:I/O>Virtualinput
-Port:1
-Action:Lightandsiren>Runlightandsirenprolewhiletheruleisactive
-Prole:selectthenewlycreatedprole
3.ClickSave.
ActivatestrobesirenoverMQTTwhencameradetectsmotion
ThisexampleexplainshowconnectacameratothestrobesirenoverMQTT,andactivateaproleinthestrobesirenwheneverthe
applicationAXISMotionGuard,installedinthecamera,detectsmotion.
Prerequisites
•Createaproleinthestrobesiren.
•SetupanMQTTbrokerandgetthebroker’sIPaddress,usernameandpassword.
•SetupAXISMotionGuardinthecamera.
SetuptheMQTTclientinthecamera
1.Inthecamera’sdeviceinterface,gotoSystem>MQTT>MQTTclient>Brokerandenterthefollowinginformation:
-Host:BrokerIPaddress
-ClientID:ForexampleCamera1
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-ThebrokerUsernameandPassword
2.ClickSaveandConnect.
CreatetworulesinthecameraforMQTTpublishing
1.GotoSystem>Events>Rulesandaddarule.
2.Enterthefollowinginformation:
-Name:Motiondetected
-Condition:Applications>Motionalarm
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:On
-QoS:0,1or2
3.ClickSave.
10