Need help?Do you have a question about the Axis F34 and is the answer not in the manual?
General| Product color | Multicolor |
|---|---|
| Color | - |
| LED type | IR |
| Sensor type | CMOS |
| Camera included | No |
| Housing material | Plastic, Zinc |
| Number of cameras | 4 |
| Placement supported | Indoor |
| Minimum illumination | 0.4 lx |
| Connectivity technology | Wired |
| Horizontal rotation angle | - ° |
| Surveillance camera form factor | Dome |
| Flash memory | 256 MB |
| Internal memory | 1024 MB |
| Channels quantity | 4 channels |
| Recorder included | Yes |
| Storage media type | Flash |
| Total storage capacity | 256 GB |
| Compatible memory cards | SD, SDHC, SDXC |
| Display diagonal | - \ |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Camera weight | 96 g |
|---|---|
| Recorder width | 121 mm |
| Recorder height | 30 mm |
| Recorder weight | 238 g |
Covers legal, intellectual property, equipment modification, and trademark information.
Details regulatory compliance for Europe, Japan, and Korea.
Covers general safety, battery handling, and disposal guidelines.
Explains different hazard levels and message indicators used in the manual.
Identifies key hardware components shown in the product diagram.
Details the purpose and connection of various ports like network and power.
Explains LED status indications and how to shorten the sensor unit cable.
Outlines methods for accessing the product via browser or the internet.
Covers essential initial setup: passwords, capture modes, power line frequency.
Describes controls on the Live View page, including manual trigger configuration.
Explains H.264 and MJPEG video stream formats and AXIS Media Control.
Details alternative ways to access video streams beyond primary methods.
Provides a guide to essential basic setup steps for the product.
Guides on setting up video streams, pixel counting, and image appearance.
Details H.264 compression and Zipstream technology for bit rate reduction.
Covers MJPEG settings, capture mode, and image appearance adjustments.
Explains white balance, exposure, shutter/gain, and privacy mask configurations.
Details stream profiles, ONVIF, image sync, and overlay configurations.
Guides on uploading and configuring overlay images for video streams.
Explains how to use overlay text within action rules for notifications.
Covers customization of Live View, including default video and viewer settings.
Describes how to create and use custom links within the Live View page.
Explains how to configure camera tampering detection and set up alarms.
Covers licensing, uploading, and general considerations for installing applications.
Details considerations, setup, and configuration for the motion detection application.
Defines areas for motion detection and uses ignore filters for accuracy.
Guides on using visual confirmation and tuning ignore filters for motion detection.
Details filters to ignore short-lived or small objects in motion detection.
Shows how to configure motion detection to trigger actions like recording.
Explains how to set up action rules and lists available triggers.
Lists available actions and how to add recipients for notifications.
Guides on setting up email recipients and creating schedules for event triggers.
Explains how to set up recurrences for triggering action rules repeatedly.
Details how to find, view, and play back recorded video clips.
Covers exporting recordings as clips and setting up continuous recording.
Details user access control, ONVIF integration, and IP address filtering.
Explains HTTPS for secure browsing and IEEE 802.1X for network access control.
Covers certificate management and setting the product's date and time.
Details IP addressing configuration, including DHCP, static IPs, and ARP/Ping.
Explains AVHS for remote access and Dynamic DNS for host name assignment.
Covers advanced network settings like DNS, NTP, host names, and ports.
Details NAT traversal, FTP, RTSP, and SOCKS proxy protocol configurations.
Explains Quality of Service, SNMP for management, and UPnP support.
Guides on managing SD cards, including unmounting and formatting.
Covers adding network shares and performing system maintenance tasks.
Provides information on system status, logs, and troubleshooting resources.
Covers scripting, file uploads, and resetting the product to factory defaults.
Addresses firmware checks, upgrades, and common IP address setting problems.
Troubleshoots issues related to browser access, login, and network connectivity.
Covers common video quality issues and storage management problems.
Provides detailed technical specifications for the AXIS F34 Main Unit.
Lists technical specifications for various AXIS F sensor units.
Provides technical specifications for the AXIS F1004 Sensor Unit.
Details technical specifications for the AXIS F4005 Dome Sensor Unit.
Lists technical specifications for the AXIS F4005-E Dome Sensor Unit.
Details power connector specifications and factors affecting system performance.
To Next Page
