Axis D4100-E - Run two profiles with different priorities; Activate strobe siren when camera detects motion

AXISD4100-ENetworkStrobeSiren
Configureyourdevice
1.GotoSystem>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectCall>State.
4.Inthelistofstate,selectActive.
5.Inthelistofactions,selectRunlightandsirenprolewhiletheruleisactive.
6.Selecttheproleyouwanttostart.
7.ClickSave.
Runtwoproleswithdifferentpriorities
Ifyouruntwoproleswithdifferentpriorities,theprolewithahigherprioritynumberwillinterrupttheprolewithalower
prioritynumber.
Note
Ifyouruntwoproleswiththesamepriority,themostrecentprolewillcancelthepreviousone.
Thisexampleexplainshowtosetthedevicetoshowoneprolewithpriority4overanotherprolewithpriority3whentriggeredby
thedigitalI/Oport.
Createproles:
1.Createaprolewithpriority3.
2.Createanotherprolewithpriority4.
Createarule:
1.GotoSystem>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectI/O>Digitalinput.
4.Selectaport.
5.Inthelistofactions,selectRunlightandsirenprolewhiletheruleisactive.
6.Selecttheprolethathasthehighestprioritynumber.
7.ClickSave.
8.GotoProlesandstarttheprolewiththelowestprioritynumber.
Activatestrobesirenwhencameradetectsmotion
Thisexampleexplainshowconnectacameratothestrobesiren,andactivateaproleinthestrobesirenwhenevertheapplication
AXISMotionGuard,installedinthecamera,detectsmotion.
Prerequisites
•CreateanewuserwiththeroleOperatororAdministratorinthestrobesiren.
•Createaproleinthestrobesiren.
•SetupAXISMotionGuardinthecameraandcreateaprolecalled“ProleA”.
Createtworecipientsinthecamera
8